Summary

Set up wired and wireless interfaces, static or DHCP addressing, DNS servers, and proxy settings.

Prerequisites

• zTC with SnapOS ≥1.3
• Network credentials (SSID/password) for Wi-Fi

Procedure

1. Open Network Settings
   • Start → Preferences → Settings → Network
2. Configure Ethernet
   • Select “Wired” → choose DHCP or Static → if Static, enter IP, Netmask, Gateway, DNS → Save
3. Configure Wi-Fi
   • Select “Wireless” → scan for SSID → click Connect → enter password → Save
4. Proxy & VLAN
   • Under “Advanced,” configure HTTP/HTTPS proxy or 802.1Q VLAN tagging → Apply

Troubleshooting

• No link light: check cable and switch port; try alternate cable.
• Wi-Fi fails to connect: verify SSID/password and RF channel support (2.4 GHz vs 5 GHz).