Factory Reset

To perform a factory reset, follow the steps below and select the method that best suits your needs.

Method 1: Factory Reset via amz_Secureshell

1. Open amz_Secureshell and log in with the correct credentials.

   

2. Once logged in, enter 19 and press Enter to select the option for factory reset.

   

3. In the factory reset menu, choose 4 and press Enter to initiate the reset process.

   

4. When prompted for confirmation, press y to proceed with the factory reset.

   Note: Make sure to back up any essential data before performing the factory reset, as this action will erase all settings and configurations.

Method 2: Factory Reset via Hardware Reset Button

1. Locate the hardware reset button on the device.
2. Press and hold the reset button for 5 seconds until the LED starts blinking.
3. Keep holding the button for an additional 3 seconds to confirm and start the factory reset.

   Note: Releasing the button within the 8-second period will cancel the reset process.

4. Release the button once the reset begins, and the device will return to factory defaults.

   Note: Ensure you back up any essential data before performing the factory reset, as this will erase all settings and configurations.

Method 3: Factory Reset via Local Web UI

1. Open a web browser and enter the device’s local IP address (e.g., 192.168.64.1).

   

2. Log in to the device’s web interface with the provided credentials.

   

3. Navigate to the Firmware section in the menu to locate the factory reset option.

   

4. Click Factory Reset. A confirmation window will appear—select Reset to confirm. The device will begin the reset process.

   

   Note: Make sure to back up any essential data before proceeding with the factory reset, as it will erase all existing settings and configurations.