How Can We Help?

< All Topics
You are here:
Print

Quality of Service

Overview

What is Quality of Service?

Quality of Service (QoS) leverages technologies within a network fabric that control traffic and help provide enhanced performance for mission-critical applications, all within a limited network capacity. With QoS, specific high-performance applications can be given priority within the overall network flow – applications such as videoconferencing, Voice over IP (VoIP), streaming media, and more.

QoS allows organizations to optimize the performance of specific applications while gaining insights into different network metrics such as jitter, latency, packet rate, and more. With this information, each application can be given a dedicated amount of bandwidth, lower latency, and controlled jitter.

How does Quality of Service Work?

QoS networking works by assessing packets and marking them based on service types then arrange the rules in routers to create virtual queues for each application based on their configured priorities. This allows bandwidth to be reserved for mission-critical applications or websites. Network administrators can select the order in which packets are handled and how much bandwidth is dedicated to each application.

Functionality

QoS networking has two main technologies for application prioritization: Flow Classification and Traffic Shaping. Flow classification leverages specific filters and route rules (including source and destination IPs, source and destination ports, IP protocol, and more) in order to take action on packets flowing through a network fabric. Traffic shaping delays the flow of certain types of packets in order to ensure that priority is maintained for applications marked as high priority. These two technologies are leveraged in what is known as a QoS policy.

Another concept of QoS networking is a QoS class, which determines the priority and bandwidth of packets based on matching QoS policy rules. One or more such QoS Classes are applied to an interface. When packets flow through the interface, they go through each QoS Class one by one and its rules one by one until each packet matches with a rule. If the packet matches the filter specified in the rule, then it will honor the bandwidth limit set which was contained by the QoS class.

QoS Policies

QoS policies have four main options, as detailed below:

  • Priority (high or low) – high priority class gets more priority while traffic shaping
  • Guaranteed minimum bandwidth – Specify minimum bandwidth guaranteed for a QoS Class
  • Maximum Bandwidth – Specify minimum bandwidth guaranteed for a QoS Class
  • DSCP marking – Optionally set DSCP marking. Packets that uses this QoS Class, will have DSCP mark specified here

Configuration steps

Define QoS classes (under Class Manager): name, assign Priority (Low/Medium/High), DSCP marking and set maximum and guaranteed bandwidth limits


Define one or more Flow Classification Rule for each QoS Class

Assign one or more QoS Classes to an Interface (under Interface Manager)

  • Enable (or disable) QoS Class and QoS for Interface.

  • Set Global Bandwidth for an Interface (Maximum and  Guaranteed B/W) (under Interface Manager)

Make sure all the Bandwidth specified in QoS Class manager is within the limit of an Interface.

Usage

QoS Class manager is used for Traffic Shaping. Packets belonging to particular QoS class can take more precedence and get guaranteed bandwidth when the Interface has more packets to process. QoS class manager helps the Traffic Shaping module to sort the collision and prioritize the packet processing based on priority and bandwidth specified in QoS Class manager.

Was this article helpful?
0 out Of 5 Stars
5 Stars 0%
4 Stars 0%
3 Stars 0%
2 Stars 0%
1 Stars 0%
How can we improve this article?
Please submit the reason for your vote so that we can improve the article.
Table of Contents
Top